Macintosh OSX 10.1 Dial-up Configuration Instructions
-
1) Click on the Apple menu and select [System Preferences...].
2) Click on the [Network] icon.
-
3) Next to [Show:], select [Internal Modem].
4) Click on the [TCP/IP] tab, if it's not already selected.
5) Next to [Configure:], select [Using PPP].
6) In the box labeled [Domain Name Servers (Optional)], enter "64.137.0.6" and "205.171.3.65".
7) In the box labeled [Search Domains], enter "totalusa.net".
-
8) Click on the [PPP] tab.
9) Next to [Service Provider:], enter "Totalusa".
10) Next to [Telephone Number:], enter your local Totalusa access number here. (e.g., 774-0110 for Logan)
11) Next to [Account Name:], enter your Totalusa account name. (i.e. user@totalusa.net)
12) Next to [Password:], enter your password.
13) If you would like your password to be saved on your computer, check the box labeled [Save password].
-
14) Click on the [Modem] tab.
15) If it's not already selected, select your modem from the pull-down list next to [Modem:].
16) Click on the [Save] (may also say [Apply Now]) button.
-
17) To dial, pen the hard drive icon on your desktop, open the [Applications] folder, open the [Internet Connect] icon, then click on the [Connect] button. To disconnect, open the [Internet Connect] utility and click on the [Disconnect] button.
*NOTE: For easier access, drag the [Internet Connect] icon to the dock.